JB/T 6666.1-1993 导叶式混流泵 型式与基本参数

上一篇: JB/T 6662.1-1993 轻小型管道输水灌溉机组 型式与基本参数
下一篇: JB/T 6654-1993 平面涡卷弹簧 技术条件

标准名称：	电子整机可靠性数据采集卡及填写规范
中标分类：	航空、航天 >> 航空、航天综合 >> 电子计算机应用
ICS分类：	航空器和航天器工程 >> 航空器与航天器综合
发布部门：	中华人民共和国航空航天工业部
发布日期：	1990-01-13
实施日期：	1990-12-01
首发日期：
作废日期：
提出单位：	航空航天工业部七0八所
起草单位：	航空航天工业部一院十二所
起草人：	黄国玉
出版日期：	1990-12-01
页数：	27页

本标准规定了电子整机（电子整机是具有独立功能、可以单独进行测试、分析、评价的硬件产品、下面简称“整机”）在设计、生产、试验、使用过程中可靠性数据采集的要求、格式和填写规范。
本标准适用于航天系统电子整机可靠性数据的采集，也可供其他系统电子整机可靠性数据采集时参考。

没有内容

没有内容

没有内容

Product Code:SAE J1453/3
Title:Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
Issuing Committee:Hydraulic Tube Fittings Committee
Scope: The JUN2002 edition of SAE J1453 was published as a single document covering the requirements for Inch O-ring faceseal connectors with SAE J1926-2 inch stud ends. In 1995 ISO 8434-3 was published covering the requirements forO-ring face seal connectors to ISO 6149-2 metric stud ends. This revision of SAE J1453 adopts the parts covered withinISO 8434-3 and the rationalized dimensions from ISO 8434-3 for both the inch and metric stud end face seal connectors.SAE J1453 has been organized into three sections as follows:1. SAE J1453-1 Specifications for O-ring Face Seal Connectors: Part 1-Tube Connection Details and CommonRequirements for Performance and Test2. SAE J1453-2 Specifications for O-ring Face Seal Connectors: Part 2-Requirements, Dimensions and Tests forSteel Unions, Bulkheads, Swivels, Braze Sleeve Connectors, Caps, and Connectors with ISO 6149-2 Metric StudEnds3. SAE J1453-3 Specifications for O-ring Face Seal Connectors: Part 3-Requirements, Dimensions and Tests forSteel Unions, Bulkheads, Swivels, Braze Sleeve Connectors, Caps, and Connectors with SAE J1926-2, Inch StudEnds
Rationale: The JUN2002 edition of SAE J1453 was published as a single document covering the requirements for Inch O-ring faceseal connectors with SAE J1926-2 inch stud ends. In 1995 ISO 8434-3 was published covering the requirements forO-ring face seal connectors to ISO 6149-2 metric stud ends. This revision of SAE J1453 adopts the parts covered withinISO 8434-3 and the rationalized dimensions from ISO 8434-3 for both the inch and metric stud end face seal connectors.SAE J1453 has been organized into three sections as follows:1. SAE J1453-1 Specifications for O-ring Face Seal Connectors: Part 1-Tube Connection Details and CommonRequirements for Performance and Test2. SAE J1453-2 Specifications for O-ring Face Seal Connectors: Part 2-Requirements, Dimensions and Tests forSteel Unions, Bulkheads, Swivels, Braze Sleeve Connectors, Caps, and Connectors with ISO 6149-2 Metric StudEnds3. SAE J1453-3 Specifications for O-ring Face Seal Connectors: Part 3-Requirements, Dimensions and Tests forSteel Unions, Bulkheads, Swivels, Braze Sleeve Connectors, Caps, and Connectors with SAE J1926-2, Inch StudEnds